Organising your DJI Avata 2 Drone for the primary time could be an thrilling expertise. On this tutorial, I’ll information you thru the steps to get your drone prepared for its maiden flight and share some suggestions and tips to reinforce each your flight and digicam picture high quality.
If you’re nonetheless on the fence about whether or not you must get the DJI Avata 2 FPV drone, try my detailed evaluate: https://oscarliang.com/dji-avata-2/
Should you resolve to get the DJI Avata 2, I like to recommend getting the Fly Extra Combo which comes with 3 batteries:
Listed below are the helpful equipment you may get to your Avata 2: https://oscarliang.com/dji-avata-2-accessories/
Step-by-Step Setup Information for Maiden Flight
Unboxing: Unbox your DJI Avata 2 and guarantee you have got all the mandatory parts: the drone, controller, batteries, charger, propellers, and documentation.
Charging: Cost the drone’s battery utilizing the included charger. It’s additionally a good suggestion to cost the controller and any spare batteries.
Energy On: Start by powering on the DJI Goggles 3, Movement Controller, and the Avata 2 Drone. Press the facility button as soon as means that you can verify battery voltage, and in case you press and maintain the button down once more till all inexperienced LEDs mild up, it activates the goggles.
Goggles Tutorial: The FPV Goggles will information you thru a tutorial explaining easy methods to navigate the menu and use the movement controller to manage your drone.
Activation: Earlier than your first flight, that you must activate the goggles (the drone and distant don’t require separate activation). Join the USB-C port of the goggles to a cell system, launch the DJI Fly App, and observe the prompts for activation. You may obtain the app from DJI’s official obtain web page: https://www.dji.com/uk/avata-2/downloads
Alternatively, you should use a pc by downloading and putting in the newest model of DJI Assistant 2 (Shopper Drone Collection) from the identical hyperlink. Should you beforehand put in this for different DJI fashions just like the O3 or unique Avata, make sure you replace to the newest model.
Firmware Replace: The app will immediate you to replace the firmware.
Linking: Sometimes, the drone ought to already be linked to the movement controller and goggles proper out of the field, eliminating the necessity for handbook pairing.
As soon as activated and up to date—a course of that ought to take not more than 10-Quarter-hour—you’re prepared for takeoff.
Flying Avata 2 with Movement Controller
For learners, the Movement Controller would possibly really feel overwhelming as a result of there are such a lot of buttons. Even for knowledgeable pilots, it takes some getting used to. Listed below are the fundamentals to get you began:
- Arm the drone: Double-press the lock button to arm the drone, motors will begin spinning.
- Disarm: Double-press the lock button once more to disarm, the motors will cease.
- Takeoff: With the drone armed, press and maintain the Lock button to provoke takeoff. The plane will ascend to about 1.2 meters and hover.
- Braking: Throughout flight, press the lock button to make the plane brake and hover in place. Press it once more to renew flying.
- Touchdown: To land, press and maintain the lock button whereas the plane is hovering. It can land robotically and shut off the motors.
- Digital camera Management: Regulate the digicam angle by tilting the movement controller up or down.
- Yaw Management: Gently press the set off and tilt the distant left or proper to pan the drone.
- Lateral Motion: Use the joystick to maneuver the drone left or proper. Pushing it up or down adjusts the drone’s altitude, ascending or descending at about 1 meter per second.
- Ahead Flight: To maneuver ahead, merely press the set off all the best way.
- Flying Up and Down: For upward or downward flight, press the set off absolutely and tilt the controller up or down.
Superior Flying Methods
By default, your DJI Avata 2 shall be in Newbie mode, which is designed to be very sluggish and secure for brand new pilots. On this mode, you possibly can’t swap flight modes, which helps stop accidents whilst you’re nonetheless studying. Nonetheless, as soon as you’re feeling assured with the fundamentals, you’re able to take the following step.
Switching Off Newbie Mode: Go to Settings -> Management to show off Newbie mode. It will unlock the drone’s full capabilities and will let you swap between completely different flying modes.
Sport Mode: By urgent the flight mode button, you possibly can activate Sport mode. Consider it as Regular mode with a big velocity increase. It’s excellent for while you need a bit extra pleasure and an opportunity to actually see what your drone can do.
Turtle Mode: Should you’re conversant in Betaflight, you’ll respect Turtle mode. This setting helps the Avata 2 recuperate from crashes by flipping itself right-side up. It’s extremely helpful in case your drone finally ends up the wrong way up after a mishap, saving you a visit to retrieve and manually reset it. You could find Turtle Mode within the Settings Menu.
Actual-time Reside View
By double tapping actually onerous on the correct facet of the goggles, you possibly can activate realtime dwell view of your surrounding utilizing the 2 entrance going through cameras.
By default it’s on 2D mode which solely makes use of one of many two cameras. You may set it to 3D within the Settings-> Show which makes use of each cameras and really improves usability IMO.
Head Monitoring
Head Monitoring is a captivating function that enhances your flying expertise by linking digicam motion to your head actions. Right here’s the way it works:
To allow Head Monitoring, go to the highest menu of your Goggles. This permits the digicam gimbal to maneuver up and down as you progress your head up and down. While you look left or proper, the drone will pan in that course (because the gimbal doesn’t transfer in horizontal axis).
Initially, controlling the digicam along with your head whereas directing the drone with the movement controller would possibly really feel a bit unnatural. Nonetheless, with some follow, you possibly can obtain dynamic and inventive photographs which might be tough to duplicate with conventional controls.
It’s essential to say that Head Monitoring solely works with the Movement Controller and isn’t supported by the Distant Controller 3.
Return to House
Maintain down the flight mode button can activate return to house (RTH) throughout flight. Throughout return to house you possibly can achieve again management by urgent the Lock button. It’s very correct, touchdown inside 1 meter of the house level.
DJI Avata 2 additionally assist Low Battery RTH and Failsafe RTH.
Linking Units
Your Avata 2, distant, and goggles ought to be linked proper out of the field. Nonetheless, if that you must re-link them for any motive, right here’s easy methods to do it. Word that there’s no devoted hyperlink button on the brand new units – to place them in hyperlink mode, you merely maintain the facility button for five seconds.
- Plane: With the drone powered on, press and maintain the facility button till you hear a steady beep, indicating the battery degree LEDs are blinking in sequence.
- Goggles: With the goggles powered on, press and maintain the facility button till the goggles begin to beep constantly.
- Completion: Linking is full when the beeping stops, and that the plane’s battery degree LEDs flip stable.
- Now repeat this for the distant, and the goggles.
Word: There’s no have to hyperlink the plane on to the distant as they convey by means of the goggles.
Firmware Replace
Personally I don’t rush to replace firmware – typically new firmware would possibly include some type of new restrictions. I at all times wait and see what the neighborhood’s suggestions is earlier than updating.
After a firmware replace, at all times restart your plane, distant controller, and goggles earlier than takeoff. This ensures all new settings take impact accurately.
Necessary: Firmware updates can reset flight parameters like RTH Altitude and Most Flight Distance. Ensure that to notice your most well-liked settings beforehand and reapply them post-update.
If the replace fails, restart the plane, distant controller, goggles, and both the DJI Fly app or DJI Assistant 2 (Shopper Drone Collection). Then, try the replace once more.
FCC Unlock
Sadly DJI Avata 2 doesn’t assist manually switching amongst FCC, CE, and SRRC. The plane will establish the nation and area the place it’s positioned in line with the situation of the cell system and the GPS of the plane, and swap between FCC, CE, and SRRC following native legal guidelines and laws.
Whereas the ham file hack doesn’t unlock further channels because it used to within the unique Avata and Goggles 2, it does improve RF output energy, permitting the drone to function in what seems to be an FCC RF energy mode. This hack additionally unlocks the velocity limitations within the EU.
Merely get the file “ham_cfg_support” and unzip it to the basis listing of the SD card and put it within the DJI Goggles 3. Obtain right here: https://drive.google.com/file/d/1ug2U_i5kdrKQQ2I17NLJBXm2tKQeNj5Q/view?usp=share_link
There are third social gathering apps that may unlock FCC mode on the Avata 2, however they aren’t free. You may as well strive a free app referred to as B3YOND however unavailable on iOS and works in older Android variations.
Finest Transmission Settings
For CE customers, channel mode is about to Auto and can’t be modified, so you possibly can skip to the following part.
For FCC customers, the next are my advisable transmission settings.
Channel Mode: Set to Guide to realize full management over transmission settings.
Frequency: Select between 2.4GHz or 5.8GHz. 2.4GHz for higher penetration by means of obstacles however restricted to 1 pilot at a time resulting from its slender bandwidth (only one channel accessible). It additionally interferes with 2.4GHz radio hyperlinks comparable to ExpressLRS, so DO NOT use 2.4GHz while you or different pilots are utilizing 2.4GHz radio hyperlinks. 5.8GHz is preferable in case you plan to fly with others, because it provides a lot wider bandwidth. Relying on interference, you might discover one frequency provides higher sign than the opposite, if doubtful, strive each and examine bitrate.
Bandwidth: Larger bandwidth gives higher picture high quality however will increase the probability of interference with different pilots. When flying solo, you possibly can safely use 60MHz or 50MHz. When flying in teams, think about decreasing the bandwidth to 50MHz, 40MHz, and even 20MHz to reduce interference.
Utilizing 5.8Ghz, you must have 3 channels with 60MHz and 50MHz bandwidth. Should you solely have 1 channel accessible, you should use the “ham file” hack to unlock the remainder of the channels, obtain the ham file and place it within the root listing of your goggles SD card: https://oscarliang.com/dji-fpv-system-fcc-700mw/#DJI-Goggles-2-and-O3-Air-Unit
Finest Digital camera Settings
To get probably the most out of the DJI Avata 2, I’ve discovered these digicam settings produce nice outcome for video high quality.
For greatest flying expertise and don’t care a lot about recording:
- Mode: Auto
- Decision: 1080p 100FPS
- Shade: Customary
For greatest cinematic footage:
- ND filter is a should, see why: https://oscarliang.com/nd-filter-fpv/
- Mode: Guide
- ISO: 100 (or as little as attainable relying in your lighting), or Auto (then set Max ISO to 400 or 800 for additional flexibility)
- Decision: 4K 60FPS (Keep away from 30FPS as a result of latency is simply too unhealthy for flying)
- Shutter Velocity: 1/120
- WB: Put White Stability on Auto first and see what the system select, then lock in with that worth, so WB is mounted throughout flight
- FOV: Huge
- Shade: D-Log M (in case you shade grade), or Customary (in case you don’t shade grade)
- EIS: OFF (in case you use Gyroflow), or Rocksteady
- Sharpness: -1 (you possibly can improve sharpness in put up)
- Noise Discount: 0 (or +1 for lowlight reduces noise at midnight space)
For stabilization, the Avata 2 provides three modes: RockSteady, HorizonSteady, and Off. RockSteady is the default setting, offering strong stabilization. You may change this within the Settings > Digital camera > EIS menu of the goggles. Should you want to stabilize footage post-flight, disable EIS and set the digicam to broad mode to assist Gyroflow offline stabilization.
Native side ratio is 4:3, by switching to 16:9 it has the highest and backside cutoff.
Some testing on Noise Discount worth, has an influence on shadow element and lowlight.
Some comparability on sharpness worth, personally I want -1, however that’s private choice.
Video bitrates beneath completely different decision/body fee:
- 4K 60fps: 130Mbps
- 4K 50fps: 120Mbps
- 4K 30fps: 90Mbps
- 2.7K 60fps: 100Mbps
- 2.7K 50fps: 90Mbps
- 2.7K 30fps: 70Mbps
- 1080p 120fps: 80Mbps
- 1080p 100fps: 70Mbps
- 1080p 60fps: 50Mbps
- 1080p 50fps: 40Mbps
- 1080p 30fps: 25Mbps
The best way to Use Distant Controller 3
The Distant Controller 3 means that you can fly in full handbook mode. You might want to activate the RC3 first and replace its firmware by way of the DJI Fly App or DJI Assistant 2 earlier than utilizing it.
To hyperlink the Distant Controller 3 to your DJI Goggles 3, observe these directions:
- Goggles: With the goggles powered on, press and maintain the facility button till the goggles begin to beep constantly.
- Distant: With the distant powered on, press and maintain the facility button till it begins beeping.
- Completion: Linking is full when the beeping stops, and that the plane’s battery degree LEDs flip stable.
Word: the Movement Controller will nonetheless work along with your drone, however you possibly can solely use one controller at a time, relies on which one connects to the Goggles 3 first.
Assign handbook mode to the mode button: Within the Goggles Settings->Controls->Distant Controller->Button Customization, set Customized Mode to Guide Mode.
Should you intend to fly in handbook mode, ensure that to take away throttle stick self centering. By eradicating the again deal with rubber, you’ll find two screws – tighten each screws will take away throttle stick self centering. By loosening or tightening each screws barely adjusts the friction, takes a little bit of trial and error to get it proper.
You may swap between Regular/Sport/Guide flight modes utilizing the mode button.
To arm and disarm the drone in Regular/Sport modes, use these stick positions.
To arm and disarm the drone in Guide mode, double press the Begin/Cease button. You may modify the digicam angle utilizing the highest left rotary swap.
In case of emergency, you should use the “Flight pause/Return to house” button in any flight mode:
- Press as soon as the quad will cease and hover in place, and put it in Regular Mode.
- Press and maintain and it’ll activate return to house; to cancel RTH, press it yet one more time.
Set your charges and expo, I’m utilizing these for freestyle flying:
- 120/800/0.5
- 120/800/0.5
- 140/650/0.5
What to Do When Dropping Sign
While you lose video, it’s probably that you simply nonetheless have RC sign. Due to this fact It’s greatest to let go of the sticks; the Avata 2 ought to provoke return to house robotically.
Different Ideas and Methods
When flying over the altitude peak restrict, the drone will go into Regular mode and received’t allow you to fly any increased. You may improve the peak restrict as much as 500 meters (in Settings->Security), however you must observe your native laws. There’s no approach to take away the altitude restrict, in order that’s one other draw back in comparison with an FPV drone.
The DJI Avata 2 features a useful ‘Discover My Drone’ function. To entry it, navigate by means of the goggles menu to Settings > Security > Discover My Drone. This function reveals video footage from the 30 seconds earlier than the drone was misplaced, aiding in its restoration. The footage is saved in inner reminiscence so SD card isn’t required. Moreover, if the drone nonetheless has battery energy, you possibly can activate the ESC Beeping perform beneath the identical menu to make the drone’s motors beep, serving to you find it by sound.
A helpful trick for goggle customers: place a chunk of tape on the sensor between the lenses. This prevents the screens from turning off while you take away the goggles, avoiding the transient delay when turning them again on.
Battery charging: as quickly as you insert the batteries into the charging hub, it should begin charging robotically. It can at all times begin with the one with highest energy degree so it finishes faster. If all of your batteries are low in energy degree, you possibly can switch the remaining cost into one single pack so you possibly can fly a bit longer – merely insert all of the batteries within the hub, press and maintain the facility button till the LED turns inexperienced. To cease, press and maintain the button once more.
To cost batteries within the discipline, I’ve been utilizing the Speedybee Discharger with an enormous 6S 10000mah LiPo. This is sufficient to recharge 6 of the Avata 2 batteries.
File Switch
Transferring information to a telephone:
The Avata 2 facilitates file switch by way of Wi-Fi by means of the DJI Fly app. Merely energy on the drone, activate the QuickTransfer perform within the app, and be sure that the drone and telephone are inside 2 meters of one another with out obstructions.
Transferring information to a pc:
Join the drone to your pc utilizing a USB cable with out powering on the Avata 2, an exterior drive ought to seem. If utilizing a reminiscence card, you possibly can straight insert the cardboard into your pc’s card reader.
Reside Feed Sharing (Video Out)
Reside feeds could be shared in 3 ways:
- Wi-Fi wi-fi sharing: Allow display screen sharing from the DJI Goggles 3 to a cell phone by way of Wi-Fi. Join the cell system to the Goggles 3 by way of Wi-Fi and use the DJI Fly app to view the drone’s dwell feed. This technique helps connection to just one cell system. The latency is over 100ms, so it’s not ideally suited for flying utilizing this feed, however adequate for spectating. If that is too uneven, think about using a USB wired connection.
- Wired sharing: Join a cell system to the DJI Goggles 3 utilizing an information cable and an OTG adapter. The linked cell system will show the drone’s dwell feed by way of the DJI Fly app. Like Wi-Fi sharing, this technique helps just one system. Latency is far decrease than WiFi.
- Viewers mode: Activate the printed perform within the DJI Goggles 3 menu, permitting a number of goggles to obtain the dwell feed and not using a viewer restrict. That is ideally suited for sharing the flying expertise with an viewers.
Word: Remember that you possibly can solely use one kind of connection at a time, whether or not connecting to goggles or a cell system.
Conclusion
By following these setup steps and suggestions, you’ll be able to seize gorgeous aerial footage along with your DJI Avata 2 Drone. Get pleasure from your flight!
Edit Historical past
- Apr 2024 – Directions written for the evaluate of the Avata 2.
- Aug 2024 – Created a separate put up for this setup information.
